Table of Contents
A garage door spring can be one of the things that you need to monitor regularly.
When it gets broken or damaged, you will have a garage door that will not close, open, and a car that will not move in any place.
Facing this kind of situation can be dreadful, but do not worry because you have many options like replacing the spring on your own or calling a professional garage door improvement company to assist you.
When you opt for a technician’s service, it can cost more than doing it on your own.
While you can save more money by doing it yourself, professionals can do their job well with safety, especially if you are not an expert on this kind of stuff.
No matter what you choose, the following tips can guide you.
Types of Garage Door Springs
Before you head to the department store and purchase a new garage door spring, check what kind of spring you need.
There are two significant types of garage door springs, and here are them:
1. Extension Springs
These are long, slim springs that go parallel in the horizontal tracks of your garage doors.
They are primarily for storing energy when the door is moving by stretching or extending it.
Extension springs can be clipped-end, open-looped, or double-looped.
- Clipped-end. This spring is the most durable in all kinds of extension springs. Clipped-end springs are commonly utilized on garage doors because they last longer and strong enough to hold more than 200 pounds.
- Open-looped. This type of extension spring is not very durable. It is the weakest of them all and still relies on an open wire. When this gets damaged, you need to replace the entire spring even though only a small part has issues.
- Double-looped. These are quite more durable than the open-looped ones. Double-looped extension springs include two coils located at the end of the spring. It is connected to the eyebolt and pulley.
2. Torsion Springs
Torsion springs are located on the door opening on the metal shaft. Commonly, a garage door includes one to four torsion springs, but it depends on the garage door’s strength, weight, and size; to achieve a particular torsion setting, aluminum drums are used at the end of the springs and metal shaft.
It can be torque-master, steel rolling-door, standard, and early-set torsion springs.
- Torque-master. It is an enclosed torsion spring on top of every torsion rods and enclosed in a winding cone.
- Steel rolling-door. It is frequently used in an industrial and commercial building. It includes a torsion barrel that commercial buildings like to use.
- Standard. Most residential garage doors opt for this type because it only requires one spring to function correctly.
- Early-set. It is the same as the standard ones, but they are placed in between the torsion shaft.
If you replace springs on residential houses, the best springs to utilize are early-set or standard torsion springs and any extensions. While on a commercial and industrial building, it is best to use torque-master and steel rolling-door springs since they have weighted garage doors.
Look Online For Spring Source
You can both go to the nearest hardware store or look on the internet.
It should be easy to find a replacement.
Just make sure that you have adequate data such as the correct measurements and spring to be used.
If you have doubts about what to look for or how to repair, calling a professional from Ottawa, Kanata, Orleans, Ontario, or garage repair door will surely help.
They can provide all the materials needed, and the work is done very well with safety measures.
Always Work With Care and Vigilance
Deciding to replace your garage door springs on your own, there is always a danger and hazard, whether you want to use an extension or the torsion springs.
The danger of falling garage doors, cuts from rust, spring breaks, and more can stress you further.
It is possible to work on your own, but it is still ideal to contact a professional garage door repair company that can get the work done with safety and cautiousness.
Call the best company now!
