Table of Contents
Garage door not working? Have you ever experienced getting locked out in front of your home?
I am not talking about the front door but the garage door.
It is frustrating when you are already nearby, and you tried to use the remote control to open the parking space, but suddenly it would not.
To think, it was working fine the morning you left. Do not panic!
Call a garage door repair company now! Or not.
There are many reasons why your door would not work in Ottawa, Kanata, Orleans and Ontario.
Its parts are complicated, and one of them might have broken after you left the house.
With this problem, you could do something.
Here are some of the most common problems with garage doors. Check them out and try to determine whether you have it.
After you can found out the trouble, you can either call a professional or repair yourself.
What are the most common garage door problems?
According to Den Garden, there are eleven reasons why some garage doors would suddenly stop working.
It can be about your mechanism, power source, remote control, door sensor, and more. Let us talk about these in more detail below.
1. Door opener sensor
The photo-eye sensor is the spy of your garage door for sensing any object near it.
When it detects something, it will stop the operation midway.
You can find these two boxes on your gates.
It must be aligned with each other so that it can transmit the light beams efficiently.
Check if there is any obstruction on it.
You might miss out some little things blocking its way so it would let you open or close the door.
2. Remote control dilemmas
Another reason for garage door not working is in opening electronic doors, remote control is what you need.
However, this might also bring some problems in the long run.
Make sure that this always has fresh batteries or else, you will never be able to open or to close your garage door.
It would help if you also made sure that the remote control transmits its airwaves correctly.
It might have some dust so it could not send well its signal.
3. More transmitter trouble
In number two, we have talked about remote controls transmitting signals, but it is not alone when it does it.
You still have the electronic mechanism on the door itself that receives the signal.
Also, it needs to be checked whether some of its wires or anything on it snapped.
4. Power source disruption
A motor mechanism would not work on its own.
Unless you have a traditional door, power source disruption may also be part of your garage door issues.
You can look at the door machine whether there are broken cables.
More so, the fuses and circuit breaker may also be affected in some cases of the problem.
If everything looks OK, you might just have a disconnected power supply.
Plug it again or change where you plug it.
5. Rusty spring
Torsion spring and extension spring are the two kinds of garage door springs used in the market today.
You will choose between the two what will pull your wavy door to open and to close.
A rusty spring is a bad thing. It will carry the weight of the door if it is near to breaking.
The garage door is just on top of it. Look if there are changes to it.
You can lubricate it if there is no serious matter. After doing so, it is still the same.
You should call a maintenance specialist right away!
6. Manual lock-on
Do you know about manual locks? If not, then you might not have an idea that your door might have been locked inside.
There are chances that you did not notice it.
Accordingly, accidents happen, and locking can be considered as one.
You can call someone from your home to see if it is manually closed.
You could also go down the car and check it yourself to make sure it will work.
7. Off tracked door
Misaligned door track is the last in this list for why garage door not working for you.
It could happen if you frequently use the garage door.
Because of the constant motion, the garage door track could move out of its usual place.
Look at the top of the entryway, tracks are always there.
Check if the pulley and its other parts are still intact.