How To Open a Garage Door Manually – If you ever encountered having to open your garage door manually, then you know just how hard and precise it must be.
Not to mention a waste of time that can otherwise be used for other means.
However, no need to fret since we’ll be talking about just how to do so in quick and easy steps!
Say goodbye to asking for help after reading this article.
Before we begin, however, let’s address the elephant in the room and talk about just why you need to open it manually in the first place.
The most common thing to happen is that you’re using the garage door while a power outage has occurred.
Other reasons are that you might have lost your remote for this, or the sensor isn’t working.
Whichever the reasons, let’s go ahead and begin with the steps on how to properly open your garage door manually without getting it fixed by a professional!
Prepare the things needed for the bypass; safety is also a priority
As you may or may not be aware, all garage doors have a bypass that you can allow you to open them manually.
It’s essential to know how to do this o avoid unnecessary garage door repairs that won’t necessarily be needed by learning this technique.
The bypass can disconnect the door from the power but still allows you to stay on track.
Once the bypass is disconnected, that’s where you can lift the garage door manually.
It’s also important to note that the door should be facing down.
Failure to acknowledge this may result in the garage door’s full weight crushing down to you and may cause severe injury.
If you’re not confident to do this, then hire professionals within your area to do this for you if you live in Ottawa, Kanata, or Ontario.
The technical aspect of how to open it manually
Right after you finished the first steps, now it’s time to get your hands dirty by pulling the emergency release cord, which is typically a red rope that is conveniently located in your garage door trolley.
The trolley is in charge of opening and closing the garage door.
After following this step, you are now free to open and close the doors.
If you are having a hard time lifting the garage door or closing it back into position due to it being too heavy, it will be an issue of a broken string.
This would entail you to replace the part yourself or, better yet, hire a professional to do this for you.
This would be one of the cases in which an expert is more suited for the job than you.
How to close the garage door and connect it back to power
So you’re done with doing the proper maintenance of your garage door, and you learned how to open it manually.
Now, what’s next? Of course, we need to teach you how to close it back correctly and without any errors.
Next is you have to attach the opener to the trolley, this is easy enough as you would just need to run the opener in a full cycle.
Meaning you need to open the garage door up and down.
After that’s done, you will hear an audible click, which means that they are now connected once again.
There you have it! Simple as pie.
Now you may want to save this article for future reference in case you might not be sure that you got all the steps down.
You can also share the information on this article with your friends who might need it more than others.
Overall, opening garage doors, no matter what type of system they use, it’s best to understand what type you own thoroughly.
The reason is all for your safety and security, because the garage is one of the entrances to your home and you wouldn’t want it to be easily accessible to unwanted visitors while you’re away or worse when you’re asleep.
If you’re still unsure how to do the steps, contact professionals in your area to help you out and properly teach it to you.