cleaning and lubricating the garage door – A garage door has many parts. A few of them are hinges, rollers, and tracks.
Accordingly, all of these need thorough maintenance to assure excellent performance.
You surely do not want faulty entryways that could cause numerous accidents to your family and properties.
When talking about maintenance, repairs are always part of it.
Besides the noted features, there might still be some more serious reasons why your garage door would budge out of nowhere.
If you have the same experience, better call for garage door repair now!
Going back about hinges, rollers, and tracks.
You need to clean and lubricate it once in a while.
If you do not do it, it will get rusty and later on develop to more garage door problems in Ottawa, Kanata, Orleans and Ontario.
Here are some notable tips and tricks about the three parts. Help yourself and make the best of your door. Do these, and it will last for longer years.
Knowing the problem
If you intend to make the best about your garage door, it is better to know things about it.
It will help you understand what you are doing.
Nuts, bolts, hinges, screws, and bolts are notably vital whether you have a manual or electronic door.
These will still do the same task despite the difference in benefits.
For the track, there are limited choices for this.
According to Artisan Door Works, a garage door expert could help you choose the best track for your home.
You only need to consider three things: headroom, side room and the top section of your door.
These should be well-thought, so the track and its parts move well for better performance.
As you use the garage door over time, you will notice that there are creaking and screeching sounds coming from the various parts.
These mean that you need to pay attention to repair and maintenance.
These could be misaligned or dislodged or broken.
If you will not, then you will have issues in raising and lowering it soon.
Cleaning and lubricating the parts
Newly installed garage doors are a wonder. They look good and work so well.
However, it could get dirty as time goes on. Use and weather add to this matter.
To make sure that it will not become faulty, you need to invest time to clean it.
It could be done any time but more importantly, after big events like storms.
Different elements could do something terrible on it, and you need to protect it right away.
You can use any cleaning materials to wash off the grime from your garage door.
Simple soap and water would help a lot. Wash the parts that could get wet but stay away from the mechanical parts.
Spray lubricants are also another thing that you can add when you buy cleaning supplies in the supermarket next time.
These are great if you want to loosen up some parts before cleaning dirt and grime.
To add, spray lubricants are your precautionary measures to more expensive repairs in the future.
One can is only worth $20 to $50. You can save a lot using these rather than spending hundreds of dollars for restoration.
How to do the cleaning and lubricating might be your problem now.
Here is the step by step on how you can do it without damaging your excellent security investment.
1. Clear any obstruction
Before cleaning and lubricating, make sure that there is nothing in your track.
It will be frustrating if there will be people or things on the way.
Remove your car from the garage, and you can also bring your materials ahead of time.
These will help you lessen the time of doing your task.
2. Check out first the worn parts
Test your door after removing obstructions. Listen to the creaking sounds.
After it, you can isolate where the worn parts are.
You may also check the other places for better security.
3. Tighten the parts
When you see where the parts are a bit loose, go and reach out for your tightening materials.
Use them first and secure yourself.
You would surely not want to get into an accident while cleaning and lubricating the garage door.
4. Clean and lubricate
This is now time to clean the dirt and grime. Wash the parts well and lubricate them after.
You can choose to use silicone-based lubricants so it will help in sealing the nuts, bolts, and other essential components in place.
5. Aligned the track
It is not only recommendable to clean your door track. Upon it, you may also see if it is misaligned.
Make sure that they are slanted still and hanging at their exact positions.
Garage Door Repairs FAQ
How do I fix a garage door the keeps reopening?
A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.
One garage spring broke. I have 2, should I replace both?
Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.
How do you fix a stuck open garage door?
First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.
Can I manually open my garage door?
If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.
How hard is it really to replace a garage door?
Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous.