Your garage door cables are very important mechanical moving parts that help ensure door operations pivot smoothly. The garage door cables function in tandem with door springs. The springs are cables are actually on the same axle or position. They would run from the roller brackets to the cable drums.
When the garage door is raised, the springs would unlock and the stored tension helps with lifting the door open. With this action, the cables would resort to wrapping around the grooves inside the cable drum.
In this case, when you attempt to lower the garage door, the cables would unwind and then rewind the springs to achieve its fullest tension. Damaged or broken cables can be a nuisance. Just imagine, if your garage door would have difficulty opening, the garage door would end up stuck and inaccessible.
High-tension cables and springs can be very risky to work on so a professional Ontario garage door cable repair service would be your go-to expert.
Is it Wise to DIY Your Garage Door Cable Repair?
Garage doors can be very heavy. You can’t maneuver a DIY when Ontario garage door cables are broken because it is dangerous to leave it that way while you are trying to figure out the mechanical process involved. While some minor problem areas of your garage can be fixed, the garage door cable isn’t for amateurs.
So many things can go wrong when you attempt to DIY a garage door cable. The cable springs are under a lot of pressure and if you’re not careful, they can hurt you.
You’ll find the cables on automatic garage doors found on both sides which lifts and lowers the doors with very minimal effort. Garage door cables are highly durable but aging and wear and tear can actually take its toll. This can cause your door cables to lose tension and snap violently.
That is why it’s important to have routine maintenance or schedule commercial and residential door repair that can detect if you have damaged or broken cables. In this case, garage door cable replacement is the most suitable step.
In this way, you would prevent further damage on your garage door but repair would also be a viable option to prevent any dangerous mishaps in case your door just collapses and put you and your family members in danger.
Get an Inspection
Your garage door cables should always be inspected annually. It also needs to be repaired or replaced if there is irreversible damage on the cables regardless of whether you have just bought it or had it for years.
The most common cable failure is when it starts to fray. This is very noticeable even with visual inspections since you will see the cables separating from one another.
Once you check that there are frayed cables, then it’s high time for repairs and replacements. There are also some instances that the cables would break while the garage door is opening or closing. This can in fact go erroneously sideways which s very risky. If your garage door goes off-track, then that spells danger as other moving parts can also be affected.
The most important part you need to focus your attention to are the cables, loops, and the bottom brackets. The loops are the ones that attach the spring, drums, and cable system together. The entire mechanism actually helps in the smooth operation of your garage door.
The minute you see any damage in your cables, you need to call for repair assistance and stop using the garage door immediately.
Cable repairs and replacements are actually very straightforward process. There is always an underlying issue that causes the problems. This could mean having bad bearings or worn-out parts that may trigger cable damage or failure.
A trained and professional Ontario garage door cable repair technician can help you with your broken spring cable problems. They would make assessments on the door system and then replace parts like the door cables when necessary. Most of the time, technicians would just replace the entire set than just remove the door cable. Door cable and adjustments are also done and testing will also be performed on the garage door system.
Garage Door Repairs FAQ
How do I fix a garage door the keeps reopening?
A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.
One garage spring broke. I have 2, should I replace both?
Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.
How do you fix a stuck open garage door?
First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.
Can I manually open my garage door?
If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.
How hard is it really to replace a garage door?
Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous.