Let’s talk about Garage Door Maintenance checklist – It is only normal for the person who owns the various items to take care of it so that it does not become old or damaged.
We take care of most of our equipment to maintain its quality, such as our car or appliances at home, but we often forget the maintenance of our garage door that we use every day.
The ageing of our garage door can cause it to break down; it can cause harm to your family, especially the children.
Damage to your garage can put the safety of your family at risk. We are sure you do not want to get into this situation, so might as well act now.
Some homeowners do not have any knowledge on how to maintain their garage door, so here are some guidelines to help you keep the beauty and quality of your garage door.
Garage Door Annual Maintenance Tips
To be safe, take the following precautions:
- Unplug the automated door opener so that it does now not activate.
- If the door is open whilst you are repairing, place something on the roller tune to forestall the door from dropping.
- Do now not disconnect any cables whilst the door spring is tense. Once you let it go, it will reduce like a knife.
- Do no longer intervene or attempt to regulate the door spring. Only professionals can do this form of job.
Necessary tools for a garage door maintenance
- Tape measure
- Screw gun
- Wrench set
- Roofing nails
- Fender washers and locknuts
- Spray-on white lithium grease
- Weather seal
- Lubricant cleaner
Follow the steps thoroughly to avoid accidents, delays and injuries.
Steps to inspect the doors hardware
- Tighten the nuts and bolts.
- Inspect the roller for wear and tear.
- Inspect the lift cable for wear.
Tighten all roller brackets to support the frame. When the wheel bearing of the steel roller starts to tilt, replacement is needed.
Buy a replacement and install it after removing the old roller bracket.
Check the condition of the cables; if you find anything wrong, do not try to fix it.
Only professionals should fix this.
Steps to maintain springs, chains and seals
- Grease the chain or screw
- Grease the springs
- Displace the weather seal
Apply lithium grease to the screw.
Through it the door opener will be more orderly and quiet, it will also prolong the life of the opener and chain. Spray cleaner like WD-40 to torsion springs above the roller tracks.
Most of the springs will break down, but after doing this, this annual maintenance will stop it from happening.
If the weather seal is damaged, replace it. On wood doors, remove the old seal and install a new one. Use roofing nails to do this.
Steps to a secure door
- Test your door
- Test the auto-reverse feature
- Install lift handles
- Bolt cable to the bracket
- Feed the wires to the spring
Test the balance of your garage door, to avoid the accident of it falling on someone or something.
When it fails, it means you still have to increase the tension and adjust the spring.
Also, test the auto-reverse feature of your automatic opener.
The door should respond within 2 seconds.
Place the lift handle on both sides of the door, loop the cable to the bolt and secure it.
The simple tips or steps mentioned do not require any special skills, and this maintenance does not take ten minutes.
Most of the tools used in repairs are stored at home, so it is convenient.
Please watch for your safety and for the protection of your family to avoid such an accident.
It is encouraged to call a professional technician if you really can not perform garage door maintenance.
If you are living in Ottawa, Kanata, Ontario, or Orleans, we can help you with your garage door repair or renovation.
How often should I perform garage maintenance?
It would be best if you cleaned your garage door twice a year to make sure it works accordingly.
If you just let the garage door get dirty, it can lead to permanent damage. Would love to learn more?
Needs help for your annual garage door maintenance?
Need any advice or help regarding your annual garage door maintenance? We can help you through it! Contact us now!