A garage door spring can be one of the things that you need to monitor regularly.
When it gets broken or damaged, you will have a garage door that will not close, open, and a car that will not move in any place.
Facing this kind of situation can be dreadful, but do not worry because you have many options like replacing the spring on your own or calling a professional garage door improvement company to assist you.
When you opt for a technician’s service, it can cost more than doing it on your own.
While you can save more money by doing it yourself, professionals can do their job well with safety, especially if you are not an expert on this kind of stuff.
No matter what you choose, the following tips can guide you.
Types of Garage Door Springs
Before you head to the department store and purchase a new garage door spring, check what kind of spring you need.
There are two significant types of garage door springs, and here are them:
1. Extension Springs
These are long, slim springs that go parallel in the horizontal tracks of your garage doors.
They are primarily for storing energy when the door is moving by stretching or extending it.
Extension springs can be clipped-end, open-looped, or double-looped.
- Clipped-end. This spring is the most durable in all kinds of extension springs. Clipped-end springs are commonly utilized on garage doors because they last longer and strong enough to hold more than 200 pounds.
- Open-looped. This type of extension spring is not very durable. It is the weakest of them all and still relies on an open wire. When this gets damaged, you need to replace the entire spring even though only a small part has issues.
- Double-looped. These are quite more durable than the open-looped ones. Double-looped extension springs include two coils located at the end of the spring. It is connected to the eyebolt and pulley.
2. Torsion Springs
Torsion springs are located on the door opening on the metal shaft. Commonly, a garage door includes one to four torsion springs, but it depends on the garage door’s strength, weight, and size; to achieve a particular torsion setting, aluminum drums are used at the end of the springs and metal shaft.
It can be torque-master, steel rolling-door, standard, and early-set torsion springs.
- Torque-master. It is an enclosed torsion spring on top of every torsion rods and enclosed in a winding cone.
- Steel rolling-door. It is frequently used in an industrial and commercial building. It includes a torsion barrel that commercial buildings like to use.
- Standard. Most residential garage doors opt for this type because it only requires one spring to function correctly.
- Early-set. It is the same as the standard ones, but they are placed in between the torsion shaft.
If you replace springs on residential houses, the best springs to utilize are early-set or standard torsion springs and any extensions. While on a commercial and industrial building, it is best to use torque-master and steel rolling-door springs since they have weighted garage doors.
Look Online For Spring Source
You can both go to the nearest hardware store or look on the internet.
It should be easy to find a replacement.
Just make sure that you have adequate data such as the correct measurements and spring to be used.
If you have doubts about what to look for or how to repair, calling a professional from Ottawa, Kanata, Orleans, Ontario, or garage repair door will surely help.
They can provide all the materials needed, and the work is done very well with safety measures.
Always Work With Care and Vigilance
Deciding to replace your garage door springs on your own, there is always a danger and hazard, whether you want to use an extension or the torsion springs.
The danger of falling garage doors, cuts from rust, spring breaks, and more can stress you further.
Call the best company now!
Garage Door Repairs FAQ
How do I fix a garage door the keeps reopening?
A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.
One garage spring broke. I have 2, should I replace both?
Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.
How do you fix a stuck open garage door?
First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.
Can I manually open my garage door?
If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.
How hard is it really to replace a garage door?
Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous.