Garage Door Maintenance Checklist
Check it out…
- Garage doors are one of the parts of the house that seem to be underappreciated.
- It secures cars parked in the garage when unused, any tools and equipment stored for safekeeping and, at times, doubles as a workspace for various types of hobbies or workouts.
- As such, it is important that your home’s garage doors remain functional to avoid any unexpected complications.
- To ensure your garage door is operating as smoothly as it can, it is imperative to conduct maintenance checks at least twice a year.
- Read through this article to learn these ten necessary steps to perform a thorough garage door maintenance check.
- Look and listen to your door.
- A lot of garage door problems are discoverable from a simple but keen observation.
- Look out for jerky movements, grinding or scraping sounds, asymmetrical sides, or anything that seems out of the ordinary.
- Garage doors tend to run smoothly up and down, relatively quiet when doing so.
- Tighten your garage door’s hardware.
- The typical movement of a garage door is to go up and down.
- This happens numerous times a year because of the constant outings of the household’s vehicle/s.
- The repeated motion and vibration from this can loosen up the door and its hardware.
- Be sure to inspect the brackets holding the tracks to the wall and ceiling.
- Use a socket wrench to tighten all loose bolts and roller brackets.
- Test the door’s balance.
- An imbalanced garage door means the door’s opener will have to work double time to open the door.
- To test the door’s balance, pull the release handle to disconnect the opener.
- Manually lift the door about halfway—it should stay in place.
- If not, the door is improperly balanced or the springs are getting worn.
- Contact a local garage door repair service company to assist you in fixing this problem.
- Check the rollers.
- The rollers are situated at the door’s edge.
- If any of the rollers are chipped, cracked, or worn then these should be replaced as soon as possible.
- Ensure that these roller brackets are not attached to the lift cables.
- Inspect the cables.
- It is discouraged to touch or tinker around with high-tension cables.
- Check your cables for any broken strands, as well as any signs of damage.
- Call a professional if such are present.
- Clear the tracks.
- Ensure the tracks found on either side of the door are clear of any debris and rust.
- You may also use a level to check if the tracks are perfectly vertical along their sections.
- If otherwise, you are free to make minor adjustments.
- However, major repairs should be left to a professional.
- Grease the moving parts.
- Twice a year, lubricate the moving parts of your garage door.
- Greasing the moving parts ensures that these components operate smoothly for longer.
- Replace weatherstripping.
- The weatherstripping of your garage door helps in keeping out the cold, dust, water, and dirt.
- These are along the bottom of the door.
- If the weatherstripping appears to be broken or cracked, replace these to keep unwanted particles inside your garage.
- Test the auto-reverse feature.
- For automatic garage doors, there is an auto-reverse feature that reverses the direction of the door.
- This happens when an object is detected to be in the door’s path.
- It also activates itself when an object is hit while the door is closing.
- To test this, grab an object (wood, brick, or a flat board) and place it in the door’s path.
- The door should reverse its direction once the object is detected.
- Inspect the door itself.
- Do not forget to check on the door itself.
- For steel doors, look out for any form of rusting.
- Also, examine for water damage, warps, and chipped or peeling paint.
- Feel free to repaint if you deem it necessary.
- Wash your door regularly with a mild all-purpose cleaner.
- A well-maintained garage door saves homeowners from a number of problems in the future.
- Make sure to take some time off your year to perform maintenance checks on your garage door.
- For any problems that require the help of a professional, you may contact your local garage door repair services.
- These are easily accessible for homeowners residing in Ottawa, Kanata, Orleans, or Ontario.
Garage Door Repairs FAQ
How do I fix a garage door the keeps reopening?
A garage door is programmed to travel a certain distance before it closes. If it closes before that distance has been traveled, it thinks something is wrong — and it reopens to help prevent any damage or safety risk. In cases such as this, most likely your garage door settings simply need to be adjusted.
One garage spring broke. I have 2, should I replace both?
Garage door springs should be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.
How do you fix a stuck open garage door?
First, check the track for obstructions. The area around the tracks needs to be completely clear. Second, check the remote; it could be a simple battery issue. If you still face an issue, manually unlock and gently try to close the door. If you still can’t find the problem, try giving us a call.
Can I manually open my garage door?
If your garage door does not open smoothly after pulling the releasing the cord, this could mean the door is off of its track, or the springs are broken. In either case, you should avoid trying to force the door open; doing so will only cause more damage.
How hard is it really to replace a garage door?
Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous.